1932 Ford Roadster MicroStreetRodTM

OUR MOTTO: "YOU DON'T KNOW WHAT YOU DON'T KNOW"

THE MicroVEHTM MicroCupCarTM



VIZATM Scooter Parts High Performance

SCOOTER SPORTS - EXHAUST EXPANSION CHAMBER KIT
Part #SS001



Description: This is the basic performance upgrade for all models of the VIZATM two wheeled scooters (except on California Models) and was designed primarily for midrange and top end performance enhancements. The low end power may be less than with use of the stock muffler. This can be improved with use of our High Performance Carb Kit. It does emit loud exhaust noise as it is a high performance part. This part works with other high performance parts listed in this section of our website.


  

Click on the above images to view a larger picture.


We manufacture the expansion chamber of precision tig welded, stamped steel with welded mounting bracket, and tuned exhaust port, and is available in bright nickel finish. The Kit includes the expansion chamber; 6061 T6511 CC machined precision billet aluminum two piece exhaust manifold; special lobed spring mounting washers; special tension head pipe mounting springs; 5mm stainless steel allen head exhaust manifold attachment bolts; stainless bolt, stainless washers, and stainless steel nylock nut for frame attachment bracket; .050 stamped aluminum heat shield; and detailed installation instructions and warranty information sheet. The kit is designed for the novice and can be completely installed in 15 minutes. Installation requires very few tools.

For all out show quality scooting, we have a limited number of genuine 24Kt. GOLD Plated Expansion Chambers, which include a polished billet exhaust manifold. Please enquire as to price and availability.

For RACING PURPOSES ONLY, we build a limited number of Black Nickel plated Expansion Chambers, which utilize a 2.5 or 3.0 inch rear exit stinger, which dramatically scavages exhaust gases collecting in the main body of the pipe, and makes tremendous top end RPM and the resulting increase in top end power. However, due to the nature of the design of this pipe, the rider will experience a loss of low end torque and some midrange power even with the high performance carb. Further, due to high operating RPM and lean mixture conditions, engine life will be shortened. Please note: For best results, this part should be used in conjunction with our high performance Double Adjustable carb, billet velocity stack and K&N style filter. Try this unit out in a racing context using MSD ignition, advanced timing, modified cylinder transfer porting and race fuel or Methonal with a little Nitro methane and KLOTZ(r) full synthetic 2 cycle oil. You won't believe the performance increase! Please enquire as to price and availability.

We usually have Exhaust Expansion Chamber Kits in all finishes (except GOLD) in stock and can usually ship your order within two business days.



Part #SS001N Bright Nickel Plated Exhaust Expansion Chamber Kit


Regular Price:

$199.95

Special Internet Price

$179.95

Shipping, Handling and Insurance, Continental USA

$15.00



SCOOTER SPORTS - EXHAUST EXPANSION CHAMBER MUFFLER KIT
Part #SS001MK


Description: This is the best solution to the high noise levels caused by the Exhaust Expansion Chamber. It was designed for exclusive use with our Expansion Chamber and is built by a prominent, motorcycle racing exhaust custom shop for us exclusively. Frankly, it's the only muffler we have tested that quiets the exhaust and allows the full performance capabilities of the exhaust to be retained. It fits our standard exhaust, in all finishes and will work as an upgrade for all models of the VIZATM two wheeled scooters (except on California Models) . It is a large part, and could scrape the ground when installed in hard cornering conditions. This part works with other high performance parts listed in this section of our website.
The muffler is made of precision tig welded, stamped steel with non-asbestos silencing material, and uses a perforated, welded interior screen and is available only in Hi Temp semi gloss black paint finish. The Kit includes the Muffler the end of which slips over the exhaust stinger of the expansion chamber; special stainless steel automotive style hose clamp for mounting to the rear bumper of the scooter; and detailed installation instructions and warranty information sheet. The kit is designed for the novice and can be completely installed in 5 minutes. Installation requires a flat blade screw driver.
We usually have Exhaust Expansion Chamber Muffler Kits in stock and can usually ship your order within two business days.

Part #SS001MK Hi Temp semi gloss Black Exhaust Expansion Chamber Muffler Kit


Regular Price:

$49.95

Special Internet Price

$42.95

Shipping, Handling and Insurance, Continental USA

$12.00

Part #SS001MK-BN Bright Nickel Expansion Chamber Muffler Kit


Regular Price:

$61.95

Special Internet Price

$54.95

Shipping, Handling and Insurance, Continental USA

$12.00

Shipping Outside Continental USA Extra, please call for shipping quote. Sales Tax will be added to purchase price where applicable.



SCOOTER SPORTS - V-2 EXHAUST EXPANSION CHAMBER KIT
Part #SS1001


We have developed a true three stage high performance expansion chamber which works with the 40CC Kei Yang engine on the NEW VIZA V-2 Scooter. IT WILL NOT WORK WITH THE CALIFORNIA ENGINE ON YOUR VIZA V-2 SCOOTER. You can expect top speed increases of 5-8 MPH and a significant increase in mid range power and top end RPMs. This pipe comes with a complete hardware mounting kit and detailed instructions. The Installation doesn't require any drilling or sawing. All parts line up perfectly the first time. We have added a Stamped, welded Aluminum heat shield for this pipe, which is powder coated Glossy Black. The Chamber Body is Bright Nickel plated for appearance and corrosion protection.

We usually have Exhaust Expansion Chamber Muffler Kits in stock and can usually ship your order within two business days.

Part #SS1001N Bright Nickel Plated Exhaust Expansion Chamber Kit


Regular Price:

$249.95

Special Internet Price

$219.95

Shipping, Handling and Insurance, Continental USA

$12.00

SCOOTER SPORTS - V-2 EXHAUST EXPANSION CHAMBER MUFFLER KIT
Part #SS1001MK


Description: This is the best solution to the high noise levels caused by our new V-2 Exhaust Expansion Chamber. It was designed for exclusive use with our V-2 Expansion Chamber and is built in house (as are all our high performance parts). It was designed the muffler to quiet the exhaust and still provide for the full performance capabilities of the expansion chamber. It fits only our high performance expansion chamber exhaust, in all finishes and will work as an upgrade for all models of the VIZATM two wheeled scooters (except on California Models). It is a large part, and could scrape the ground when installed in hard cornering conditions. The muffler is made of precision tig welded, stamped steel with non-asbestos silencing material, and uses a perforated, welded interior screen and is available only in Hi Temp semi gloss black paint finish. The Kit includes the Muffler the end of which slips over the exhaust stinger of the expansion chamber; special dual springs for mounting to the lower portion of the expansion chamber; detailed installation instructions and warranty information sheet. The kit is designed for the novice and can be completely installed in 5 minutes. Installation requires a pair of needle nosed pliers.

We usually have Exhaust Expansion Chamber Muffler Kits in stock and can usually ship your order within two business days.

Part #SS1001MK Hi Temp semi gloss Black V-2 Exhaust Expansion Chamber Muffler Kit


Regular Price:

$49.95

Special Internet Price

$42.95

Shipping, Handling and Insurance, Continental USA

$9.00

Part #SS1001MK-BN Bright Nickel V-2 Expansion Chamber Muffler Kit


Regular Price:

$61.95

Special Internet Price

$54.95

Shipping, Handling and Insurance, Continental USA

$9.00

Shipping Outside Continental USA Extra, please call for shipping quote. Sales Tax will be added to purchase price where applicable.



SCOOTER SPORTS - HIGH PERFORMANCE CARB KIT
Part #SS003


Description: This is the second basic performance upgrade for all models of the VIZATM two wheeled scooters (except on California Models) and was designed primarily for bottom end and midrange performance enhancements. The high performance carburetor has a venturi size approximately 100% larger than the stock carburetor and has one adjustment. Matched with the Exhaust Expansion Chamber Kit, a significant overall performance enhancement over standard can be observed. The kit uses the stock throttle cables, air cleaner, fuel inlet tubes and mounts in the exact location of the stock carburetor.

The high performance carburetor is of WALBRO(r) manufacture and has been matched to the Kei Yang engine for maximum performance enhancement. We manufacture the replacement intake manifold which is made of either linen phenolic or Nylon 908 (both composites), serving as an effective heat sink and is computer precision"taper" machined for maximum fuel/air velocity, precise fuel pump pulse canal match and perfect fit to the stock engine cylinder head. The Kit includes the replacement high performance carburetor ; the composite replacement intake manifold; two precision, custom die cut intake manifold gaskets with precise fuel pump pulse canal match; and detailed installation instructions and warranty information sheet . The kit is designed for the novice and can be completely installed in 15 minutes. Installation requires very few tools.

We usually have High Performance Carb Kits in stock and can usually ship your order within two business days.


Part #SS003
High Performance Carb Kit


Regular Price:

$82.00

Special Internet Price

$75.00

Shipping, Handling and Insurance, Continental USA

$11.00

Shipping Outside Continental USA Extra, please call for shipping quote. Sales Tax will be added to purchase price where applicable.



SCOOTER SPORTS – HIGH PERFORMANCE CARB KIT FOR MITSUBISHI “JOHN DEERE” ENGINE
Part #SS003M


Description: This is the second basic performance upgrade for all models of the VIZA two wheeled scooters which use the NEW MITSUBISHI “JOHN DEERE” 33CC ENGINE and was designed primarily for bottom end and midrange performance enhancements. The high performance carburetor has a venturi size approximately 100% larger than the stock carburetor and has one mid-range adjustment. Matched with the Exhaust Expansion Chamber Kit, a significant overall performance enhancement over standard can be observed. The kit uses the stock throttle cables, air cleaner, fuel inlet tubes and mounts in the exact location of the stock carburetor.

The high performance carburetor is of WALBRO manufacture and has been matched to the Mitsubishi Engine for maximum performance enhancement. We manufacture the replacement intake manifold which is made from Nylon 908, serving as an effective heat sink and is computer precision “taper” machined for maximum fuel/air velocity, precise fuel pump pulse canal match and perfect fit to the stock engine cylinder head. The Kit includes the replacement high performance carburetor; the composite replacement intake manifold; two precision, custom die cut intake manifold gaskets with precise fuel pump pulse canal match; and detailed installation instructions and warranty information sheet. The kit is designed for the novice and can be completely installed in 15 minutes. Installation requires very few tools.

We usually have High Performance Carb Kits in stock and can usually ship your order within two business days.


Part #SS003M
High Performance Carb Kit For MITSUBISHI “JOHN DEERE” ENGINE


Regular Price:

$84.00

Special Internet Price

$77.00

Shipping, Handling and Insurance, Continental USA

$11.00

Shipping Outside Continental USA Extra, please call for shipping quote. Sales Tax will be added to purchase price where applicable.



SCOOTER SPORTS - HIGH PERFORMANCE DOUBLE ADJUSTABLE CARB KIT
Part #SS003D


Description:
This is similar to the High Performance Carb Kit except this carburetor has two adjusting screws. One on the top of the carb barrel and one on the side of the carb. It is available as a performance upgrade for all models of the VIZATM two wheeled scooters (except on California Models) and was designed primarily for greater flexibility in mixture adjustments allowing a leaner mixture setting than the regular Hig Performance Carb Kit. The double adjustable high performance carburetor has a venturi size approximately 100% larger than the stock carburetor. Matched with the Exhaust Expansion Chamber Kit, a significant overall performance enhancement over standard can be observed. The kit uses the stock throttle cables, air cleaner, fuel inlet tubes and mounts in the exact location of the stock carburetor.
The double adjustable high performance carburetor is of WALBRO(r) manufacture and has been matched to the Kei Yang engine for maximum performance enhancement. The replacement intake manifold is made of either linen phenolic or Nylon 908 (both composites), serving as an effective heat sink and is computer precision"taper" machined for maximum fuel/air velocity, precise fuel pump pulse canal match and perfect fit to the stock engine cylinder head. The Kit includes the replacement high performance carburetor ; the composite replacement intake manifold; two precision, custom die cut intake manifold gaskets with precise fuel pump pulse canal match; and detailed installation instructions and warranty information sheet . The kit is designed for the novice and can be completely installed in 15 minutes. Installation requires very few tools.
We usually have High Performance Double Adjustable Carb Kits in stock and can usually ship your order within two business days.


Part #SS003D
High Performance Double Adjustable Carb Kit


Regular Price:

$97.00

Special Internet Price

$90.00

Shipping, Handling and Insurance, Continental USA

$11.00

Shipping Outside Continental USA Extra, please call for shipping quote. Sales Tax will be added to purchase price where applicable.



SCOOTER SPORTS - HIGH PERFORMANCE DOUBLE ADJUSTABLE CARB KIT FOR MITSUBISHI “JOHN DEERE” ENGINE
Part #SS003M


Description: This is the second basic performance upgrade for all models of the VIZA two wheeled scooters which use the NEW MITSUBISHI “JOHN DEERE” 33CC ENGINE and was designed primarily for bottom end, midrange performance, and high end enhancements. The double adjustable high performance carburetor has a venturi size approximately 100% larger than the stock carburetor and has one mid-range adjustment, and one high-end adjustment. Matched with the Exhaust Expansion Chamber Kit, a significant overall performance enhancement over standard can be observed. The kit uses the stock throttle cables, air cleaner, fuel inlet tubes and mounts in the exact location of the stock carburetor.

The high performance carburetor is of WALBRO manufacture and has been matched to the Mitsubishi Engine for maximum performance enhancement. We manufacture the replacement intake manifold which is made from Nylon 908, serving as an effective heat sink and is computer precision “taper” machined for maximum fuel/air velocity, precise fuel pump pulse canal match and perfect fit to the stock engine cylinder head. The Kit includes the replacement high performance carburetor; the composite replacement intake manifold; two precision, custom die cut intake manifold gaskets with precise fuel pump pulse canal match; and detailed installation instructions and warranty information sheet. The kit is designed for the novice and can be completely installed in 15 minutes. Installation requires very few tools.

We usually have Double Adjustable High Performance Carb Kits in stock and can usually ship your order within two business days. BEWARE, THIS MODIFICATION COULD SERIOUSLY LEAN OUT THE MISTUBISHI ENGINE AT TOP RPM!

Part #SS003MD
High Performance DOUBLE ADJUSTABLE Carb Kit For MITSUBISHI “JOHN DEERE” ENGINE


Regular Price:

$99.00

Special Internet Price

$92.00

Shipping, Handling and Insurance, Continental USA

$11.00

Shipping Outside Continental USA Extra, please call for shipping quote. Sales Tax will be added to purchase price where applicable.



SCOOTER SPORTS - HIGH PERFORMANCE K and N STYLE AIR FILTER WITH BILLET VELOCITY STACK ASSEMBLY
Part #SS006


Description:

This Assembly is for use with either of the High Performance Carb Kits and is especially suited to the intake air velocities required for peak performance of the Exhaust Expansion Chamber Kit. It is available as a performance upgrade for all models of the VIZATM two wheeled scooters (except on California Models) and was designed primarily for creating a venturi effect at the inlet side of the carburetor and providing a much less restrictive, greater surface area air filter when compared with the stock unit. Matched with the Exhaust Expansion Chamber Kit, and either Carb Kit, a significant overall performance enhancement over standard can be observed. The assembly uses the stock mounting screws for the carb and mounts in the exact location of the stock air cleaner. Due to its design for maximum air flow, the assembly does not include an engine choke.

We manufacture the billet velocity stack and the K and N style filter is built for us by a reputable motorcycle manufacturer. The velocity stack is matched to the intake side of the High Performance Carb but will work with the stock carburetor, and is CC computer smooth taper machined from 6061 T6511 extruded aluminum for maximum intake air velocity and has been matched to the Kei Yang engine for maximum performance enhancement. The Assembly includes the billet velocity stack and replacement high performance K and N style high volume air cleaner. The kit is designed for the novice and can be completely installed in 5 minutes. Installation requires a phillips head screw driver.

We usually have High Performance K and N Style Air Filter With Billet Velocity Stack Assemblies in stock and can usually ship your order within two business days.

Part #SS003D
HHIGH PERFORMANCE K and N STYLE AIR FILTER


Regular Price:

$32.50

Special Internet Price

$27.00

Shipping, Handling and Insurance, Continental USA

$11.00

Shipping Outside Continental USA Extra, please call for shipping quote. Sales Tax will be added to purchase price where applicable.



SCOOTER SPORTS - RACING SLICK TIRES AND MATCHING INNER TUBE
Part #SS009 (Tire)
Part #SS010 (Tube)

  

Description:

The Racing Slick is a replacement tire for the stock unit on and is available as a performance upgrade for all models of the VIZATM two wheeled scooters. The Slick Tire is primarily for permitting significantly better gripping in hard cornering and to provide a larger contact patch with the road surface such as in high speed or racing conditions. This product is for use on paved DRY surfaces only. We have observed a significant overall handling enhancement over standard tire configuration when the Slicks are used. The Slick Tire uses the stock mounting configuration on the Viza cast aluminum wheels or Scooter Sports "SLOTS" billet aluminum wheels. Due to the lack of treads on the Slick Tire, it is not suitable for use on wet or loose surfaces.

The rubber compound used in the Slick Tire is softer than the stock VIZA tires which, while potentially wearing more rapidly has the benefit of potentially greater adherence to dry road surfaces. Due to the design match of the Slicks with the special Inner Tubes, it is recommended that the stock VIZA inner tubes not be used with the Slicks.

Installation can be accomplished easily by the novice and can usually be completed in 30 minutes. Installation requires very few tools.

We usually have Racing Slick Tires and Matching Inner tubes in stock and can usually ship your order within two business days.

Part #SS009
Racing Slick Tire (Price is for One Tire)


Regular Price:

$17.50

Special Internet Price

$15.50

Shipping, Handling and Insurance, Continental USA

$13.00


Part #SS010
Racing Slick Inner Tube (Price is for One Inner Tube)

Regular Price:

$6.50

Special Internet Price

$5.75

Shipping, Handling and Insurance, Continental USA

$13.00


Shipping Outside Continental USA Extra, please call for shipping quote. Sales Tax will be added to purchase price where applicable.





© EZ Burger Company LLC dba Scooter Sports 2001, 2002, 2003, 2004